Not Feeling the Heat? A Ductless Mini Split Might be the Answer!

Isn’t it funny that we forget about whatever bothers us from season to season until we have to endure it again? As the cold weather rushes in, you might once again be feeling the sting of cold in specific areas of your house where the HVAC system just can’t seem to reach. Instead of suffering through another season, wishing it away, this year hire a ductless mini split Charleston, SC company to fix the problem for good!

They are Economical

Ductless mini splits might be an investment to install, but overall, they will end up saving you money! Not only will your traditional HVAC system not have to work so hard, which will decrease your monthly energy costs, but it will also give your system a much-needed break. Over the long term, that means that you will put less wear and tear on your units, increasing their lifespan. And you will also decrease the need for unnecessary repairs from excessive wear and tear.

The Heat is Immediate and Consistent

When you install a ductless mini split, the heating and cooling is immediate. Once you turn them on, the room will reach exactly the right temperature in very little time and it will also maintain that temperature instead of the huge fluctuations you are used to right now. And when you are done, you can switch it off again and head to bed. That means you aren’t paying to heat a room that no one is using. Again, it is a real money saver.

Comfortable and Install a Ductless Mini Split

No Room for Traditional Ducts?

If you have spaces in your home that have been left unheated or barely heated because logistically there just wasn’t space for ducts, your problem is now solved. Ductless mini splits can be placed anywhere because they require no wall space for duct work to travel to the furnace and back. They can literally be used anywhere that you want to heat and cool better without any problems with placement space. And they also come in many different sizes and shapes for an inconspicuous look.

They are Virtually Silent

The newer models of ductless mini splits are virtually silent. That means you can place them in small spaces and barely notice when they turn on. If you are concerned about them being too noisy for small rooms, don’t be! They are more silent than you can imagine thanks to all the amazing advances made over the past couple of years.

They are the Solution That Isn’t a Fire Hazard

If you have been using a space heater to help during the cold spells, then you are increasing the risk of fire in your house. A space heater is not meant to be left unattended or to be used while sleeping. So instead of taking a chance this winter, do something that solves the problem for good and year round!

Winter is just around the corner. This year instead of suffering through months of being cold and drafty, commit to change for the better. A mini split Charleston, SC installation company can help provide a permanent solution to your temperature problem. Contact Carney & Son today to discuss how we can get your house evenly tepid throughout!

Having Guests for the Holidays? Make Sure They are Comfortable and Install a Ductless Mini Split

Most of us have rooms in our home that are, well not as comfortable as others. If you are having guests during the holidays and sticking them in a room that is less than tepid, now is a perfect time to find ductless mini split installation company and even things out. It is an excellent investment, that although you are doing for them, you are also doing for yourself. A ductless mini split installation will produce many advantages for your house overall.

Increase the Equity of Your Home

You know the issue of drafty rooms has always been a problem. Commit to fixing the problem by installing a mini split. They are not only very inexpensive, the value that they add to your overall home is immeasurable. Not only will they solve the draft issue, they will stop your traditional HVAC system from working overtime trying to get to places that it can’t. Over time, that will save the wear and tear of your HVAC system and lead to a longer lifespan and less necessary repairs!

Decrease Your Energy Costs with a Ductless Mini Split

By zone heating those hard to heat and cool areas of your home, you are decreasing the work that your HVAC system has to do now. And that will mean less output monthly which will save you money over the long term. When the rooms with the mini splits are unoccupied, you can shut them off and leave them off. Better yet, when you do want to use them, all you have to do is flip a switch and you can instantly heat and cool them to a perfect temperature!

It Will Fix a Long Standing Problem!

Have a room where the heat and air simply won’t go to but there isn’t enough wall space for traditional duct work and there isn’t window access for an air conditioning window unit? The solution can be found in a ductless mini split. Whatever has prevented you in the past from making a room livable can be overcome by a mini split. It neither needs ducts nor ventilation. It is like a miracle solution all in one!

They are not Hazardous

If you are using a space heater to heat those areas that the heat doesn’t seem to get to, that can be a recipe for disaster. Not only are space heaters very expensive to run throughout the winter, they are also a fire hazard. A ductless mini split will not cost much to run and there are no fire hazards involved. It is a perfect long term solution without any negative risks!

If you are having guests for the winter, now is a perfect time to find ductless mini split installation service near me! Installing one will permanently fix a long standing problem, make things more comfortable and add equity to your home! Contact Carney & Son today to discuss how we can even out your heating and cooling issue!

Almost Time to Run the Heater…Here’s What you Need to Know

As anyone who has ever turned on the heat for the first time in the fall can attest to, it can sometimes smell like the house is on fire. But have you ever wondered where that smell comes from? As you turn your thermostat from cool to heat, these are some things that you should know! Before you crank up your furnace, these are the things you need to do to prepare your Charleston heating and air system.

Call a Professional

It is always recommended that you call a professional HVAC technician before you turn your heat on. Although you can change your air filters on your own and clean any debris that might be lingering, there are maintenance issues that only a professional can address. Remember, your system has been sitting idle for an entire season, which is plenty of time for dust and dirt to accumulate. And that is also plenty of months for problems to surface that you can’t see.

If Fall Snuck up on you

When life gets hectic, the last thing on your to-do list is probably your HVAC maintenance. And if the cold air snuck up on you, now is the time to schedule your appointment. In the interim, however, expect that when you turn the heat on, there will be a burning smell coming from your vents. There is no reason to be alarmed if that happens.

The majority of the time, that smell is not a sign of danger. After sitting all summer long, a lot of household dust and dirt has likely settled on your furnace. That debris will start to burn off and create a noxious smell. Although it is normal the first time you turn on your heat, if it lingers past the first time, then it could be a sign that something is wrong. And you should definitely be concerned and call a professional to ensure that nothing hazardous is lurking.

Why Scheduling Maintenance is Important

Although, in most cases, the burning smell of the first time you turn on your heater is nothing more than dirt and debris burning off from the summer months, getting your HVAC maintained regularly is still critical. Even if the heater doesn’t smell past day one of turning it on, that doesn’t mean that there aren’t other things gone awry. Not only will a technician be able to clean your furnace to help it work more efficiently, but they can also diagnose and spot signs of a problem before it becomes problematic. Operating under the guise that if it isn’t broken, don’t fix it will most likely lead to an emergency call for something neglected.

Now that the hot summer weather has given way to a nighttime chill, it might be time to fire up your heat. If possible, have your furnace maintained after the long summer. But if you didn’t get a chance, don’t be alarmed by the first heat smell. If it continues, make sure to call a professional. And if it doesn’t continue, make sure you call a professional.

The only way to ensure that everything is in top working order is to have your system regularly maintained according to the manufacturer’s specifications. Contact Carney & Son today to schedule your fall Charleston heating and air maintenance.

Crawl Space: Encapsulation vs. Vapor Barrier

The key to maintaining the structural integrity of your home and the health of your family is to reduce moisture buildup in your crawl space. There are two ways to tackle water and moisture issues beneath your home. If you are considering the difference between encapsulation vs. vapor barrier, and which one is better for you, it is best to understand what they are and how they differ.

Crawl Space Encapsulation in Charleston, SC

When you want to seal your crawl space against moisture and water, encapsulation is a process where it is wrapped entirely in white plastic. When you choose to encapsulate your crawl space, it is a highly involved process that requires the installation of a dehumidifier and a sump pump. Encapsulating your crawl space helps to reduce moisture and any resulting mildew and mold. It is also a highly viable option to increase the air quality in both your crawl space and your home. And if you choose to have your crawl space encapsulated, it can be used as storage, since it will be completely clean and moisture free.

Facts About the Encapsulation Process

  • All the junctions, seams, and vents in your crawlspace are entirely sealed
  • Encapsulating your crawl space results in the ground under your home being 100% sealed in white plastic
  • Encapsulating your crawl space typically involves insulated band joists and insulated foundation walls
  • To have your crawl space encapsulated, you are required to have an additional mode of air conditioning that includes a dehumidifier, an air supply from your HVAC system, or an exhaust fan

Benefits of Encapsulation

There are many benefits to having your crawl space encapsulated. One of the most significant benefits is that it increases the air quality in your home. Encapsulating your crawl space can help to reduce allergens, mold, mildew, and insects. When you encapsulate your home, you also reduce humidity, which means that your HVAC system has to work less to maintain a constant temperature. This results in lower energy costs and increasing the lifespan of your HVAC units. According to Advanced Energy studies, encapsulating your home can help to reduce your heating and cooling costs by as much as 20%. And since it reduces moisture, having your crawl space encapsulated can help to eliminate mold growth.

Crawl-Space

Vapor Barrier

A vapor barrier installation involves covering the crawl space floor of your home with a 6mm black plastic cover. The process does not include sealing any vents. Therefore, you are not required to install a dehumidifier or a sump pump. However, sometimes installing a sump pump might be warranted with a vapor barrier depending on the situation within your crawl space.

Facts About Vapor Barriers

  • A vapor barrier uses black 6mm plastic to cover the length of your crawl space according to building code requirements
  • Vapor barrier vs. encapsulation is about a quarter of the cost
  • A vapor barrier does not require the installation of a dehumidifier or a sump pump

Benefits of a Vapor Barrier in Charleston, SC

When you install a vapor barrier, you get the same benefits that you do with encapsulation, except additional storage space. You might still be able to store things in your crawl space, but the process does not make it as “clean” as the encapsulation process does. Vapor barriers save you money in energy costs and help to reduce the risk of mold and mildew growth. And it comes with lesser investment.

Which is Right for you?

To protect the structural and environmental integrity of your home, keeping your crawl space moisture free is a must. Both encapsulation and vapor barrier are an excellent way to reduce the risk of mold and enhance the lifespan of your HVAC. The major difference is in cost; having your crawl space encapsulation is about three times more expensive than a vapor barrier.

Contact Carney & Son, the clear choice for expert crawl space issues today to discuss which method is best for you.

Ductless Mini-Split System and Cooling

Ductless mini-split systems have come a long way over the past decade. And although they used to be an alternative in situations where ducts were problematic, their upgrades, efficiency, and flawless nature are making them a viable choice for homes everywhere. Which begs the question, “is a ductless mini-split a good idea for your home?”.

The Advantages of a Ductless System

A ductless air conditioner or heat pump usually comes as a wall-mounted unit that can be used anywhere without the need for an outdoor air compressor. It is typically used in situations as an alternative to a window air conditioning system or baseboard heating, like in a home remodel. Unlike window units, the advantage that a ductless system has is that it requires nothing more than a tiny hole drilled directly into the wall. That makes it more airtight and doesn’t open people up to security problems. Ductless systems are also not such an eyesore, and they run much more quietly than their window unit counterparts.

Energy-Efficient

Ductless mini-split system and cooling units are also much more eco-friendly and energy-efficient than systems that require ductwork. Since the air doesn’t have to travel from the cooling system to the room via ducts, it cuts down on energy waste. Also, they have inverter-driven compressor systems that adjust by speeding up and slowing down according to conditions. So instead of completely shutting down and starting back up like traditional HVAC compressor units, it is a much more efficient operating system. If you purchase a ductless mini-split system for cooling, you can save as much as 30% on your monthly heating and cooling bills. And you may qualify for a local or federal tax credit or incentives.

The Disadvantages of a Ductless System

Ductless mini-split systems have a lot of advantages, but they do not come without any drawbacks. The cost of a ductless system is a more significant investment upfront. They can sometimes cost two to three times more than baseboard heating or window unit alternatives. And when you choose to switch over to a ductless system, you can expect to pay two to three times the cost of simply replacing what you already have. But with the energy savings that you will gain, over time, that investment will come back tenfold.

Aesthetics

Although ductless systems have come a long way, they still hang on the wall. So unlike ductless systems that you can’t see, a mini-split will be visible. But the newer units come in various colors so that you can try to make them a bit more inconspicuous. And if you find a reasonable place to hang them, they are less noticeable than you think.

Regular Maintenance

The regular maintenance on a ductless system is a little more than you get with traditional duct systems. You have to clean the fans, especially if you have pets, to keep their energy efficiency high. And also, to avoid a costly repair and excessive wear and tear, be forewarned; if you fail to keep the maintenance up, it can be expensive.

What are the Ideal Situations Where Ductless Systems are a Clear Choice?

There are situations where a ductless system is a clear choice, and others, like in whole house cooling, where the decision is not so clear.

New Additions, Sunrooms or Bonus Rooms

When you add on to your home with additional rooms, running the ductwork might not make sense. For rooms that you only use occasionally, like sunrooms, a ductless mini-split allows you to turn the heating and cooling on and off just when you need it. That way, you aren’t spending money on spaces that aren’t in use. Although ductless isn’t a cheap alternative, sometimes it is far more economical than running ductwork from one end of the house to the next.

Mini-Split

Downsizing Larger Homes

Once you have an empty nest, it doesn’t make much sense to heat and cool a house where several rooms are not being occupied. If you use a ductless system, you can zone off areas to be warmed and cooled for more control and lower energy costs.

Make Everyone Happy

If you have family members who are constantly fighting over what temperature is most comfortable, a ductless mini-split allows them to control their environment independent from one another. That means everyone can live in a comfortable environment. And it also means less up and down of the thermostat, which can put excessive wear and tear on it!

Reduce Cold Spots

For some homeowners, various rooms simply can’t be heated and cooled consistently. If you have rooms where the heating and cooling doesn’t reach, a ductless mini-split is an excellent choice to cut down on energy efficiency and to keep all things tepid.

Finding a Reputable Ductless Mini-Split and Cooling Contractor

Ductless mini-splits are an excellent alternative to traditional HVAC duct systems, but only if they are installed correctly. Knowing what type of system will work best, how large you need it to be, and how to install it expertly, are all essential to ensure that you are making a wise investment.

The experts at Carney & Son are leaders in the industry because we have the best trained technicians who know how to ensure that your ductless mini-split investment is a sound choice. And also, it continues to save you money! Contact us today for an evaluation!

Do I Need Carbon Monoxide Detectors in My Home?

If you are wondering if your home needs carbon monoxide detectors, the answer is pretty straight-forward. Anytime that you burn solid or liquid fuel for cooking, heating, or any other use, you absolutely need a CO detector installed in your home. And since most homes have an attached garage or other gas-powered equipment, likely every home should have a detector, whether they have an appliance that burns fuel or not.

What is Carbon Monoxide?

Carbon monoxide is a colorless, odorless, basically undetectable gas that is dangerous in any amount. When you breathe in CO2, it binds with the hemoglobin of red blood cells, and then it proceeds to take the place of oxygen. Breathing it in will lead to oxygen starvation of the blood cells, which is technically called hypoxia, and it is fatal.

Facts About Carbon Monoxide Detectors

Carbon monoxide is present in the air that you breathe all around. But it is dangerous at high levels, such as when you are burning fuel that emits it, which can make it fatal. It is a byproduct created from the combustion of hydrocarbon fuels. Those hydrocarbon fuels include propane, coal, gasoline, and natural gas, just to name a few.

Combustion equipment and appliances that are used around the home create CO gas regardless of how energy efficient they are. Carbon monoxide is measured in something called “parts per minute”. The higher the concentration of CO is, the more symptoms will present themselves.

  • Between 0.5-5 ppm is a standard range of home exposure due to combustion appliances
  • Anything below 70 ppm for more than six to eight hours can lead to dizziness and headaches. If a person has a pre existing heart condition, they can also experience chest pains.
  • 100 ppm for more than two hours can lead to fatigue, nausea, and headaches
  • 150 – 200 ppm for any long term can be fatal

What are Appliances That Burn Fuel?

Most appliances that burn fuel, when tested properly, maintained, and installed correctly, are generally not dangerous. If, however, the exhaust fan or any part of the functioning appliance is clogged, it can lead to a dangerous release of CO gas into the home. Common things like pest nests or even heavy snowfall can block chimneys and vents, and lead to CO gas exposure. Examples of combustion appliances include:

  • Any wood-burning device, such as heat stoves, wood stoves, fireplaces, parlor stoves or wood-pellet stoves
  • Natural, propane or oil appliances, including furnaces, boilers, ranges and cooktops, certain refrigerators, space heaters, fireplaces, and hot water heaters
  • Diesel or gas fuel equipment like generators, which should always be outdoors
  • Agricultural, bio, or any other heating stoves that burn fuel.

The Recommended Number of CO Detectors

CO detectors have the same recommendations as fire detectors. At a minimum, every house should have at least one detector located on each floor, one located near sleeping areas, and if you have a basement, one in the basement. If there is a common hallway where rooms are located, then hallways should also have a detector. If you have forced air heat, however, the leak can go individually to each room. So, it is appropriate to have a CO detector for every room where people will be sleeping. Other areas such as sunrooms, attics, or even closed-in porches that have a fuel-burning appliance should have a CO detector. And the same is true for outbuildings that have appliances that burn fuel.

What are the Types of CO Detectors?

Carbon monoxide detectors can be both plugged in and hard-wired. There are also CO detectors that combine both smoke detection along with CO monitoring. Hard-wired models are connected to your home’s overall electrical wiring system, and they should also have batteries for back-up in case the electricity goes out. Most hard-wired CO monitors are connected so that if one is triggered, it triggers them all to alert you of exposure. Some plug-in models also have interconnectivity; they do so wirelessly.

Standard carbon monoxide detectors have lights to indicate various alarms while others give a digital readout. The types with a digital display should indicate CO levels at all times; if not, then it is not working properly. If you notice that the display continues to inch up, that is an indication that there might be a leak in your combustion appliances. Levels that are high, and can lead to symptoms, are not always detectable via the alarm.

Installation and Maintenance Tips

Anyone can install a plug-in carbon monoxide detector simply by plugging it in. Just make sure to put batteries in it frequently. And also, ensure that it isn’t covered by any curtains, furniture, or other obstacles that can stop it from a correct reading. The electrical models, however, take a little more expertise to install. And since they are such an integral part of keeping everyone safe, it might be better to allow a professional to install them via their instructions and specifications. Since CO detectors work differently, it is important to read the manufacturer’s instructions to make sure that they are working properly.

It is essential that you also clean CO detectors using a vacuum monthly and that you replace the batteries every six months. Carbon monoxide detectors do not last forever, so make sure to write down the purchase date before it is installed. That way, you will know when it is time to replace it.

At Carney & Son, we value our customers greatly and want to ensure that you are safe at home. Our team of professionals is expert at both installing and maintaining your CO detector. That way, you know for sure that it is working properly! Contact us to discuss all of your HVAC needs! Don’t forget our carbon monoxide detectors also detect natural gas too.  We install them and warranty CO detectors for 5 years and replace them at no cost if needed!

Benefits of a Crawl Space Vapor Barrier in Charleston SC

When a home sits on top of a crawl space, it rests on nothing but a dirt floor that tends to be damp and musty. A crawl space typically experiences water that can sometimes pool. And moist conditions can increase the risk of developing mold, insects, rust, rot, and mildew that can make for some pretty hazardous conditions for the health of your family. A crawl space vapor barrier is an excellent solution to help reduce the risk of environmental hazards. But the full benefits of a vapor barrier can only be realized if they are installed correctly. If done right, a vapor barrier can protect your home and dwelling spaces from moisture and all of the ill effects that can come with it.

What is a Vapor Barrier for a Crawlspace?

A vapor barrier is designed to prevent moisture in the dirt from evaporating into the area that lies beneath your home. The barrier itself is made from plastic materials or a foil sheet, and it helps to prevent the moisture in the dirt from penetrating the environment contained underneath your home. It also helps to reduce the risk of odors, mold, insects, rot, and other environmental and structural degradation that can stem from a crawl space being left exposed.

There are several benefits of vapor barrier for crawl spaces:

Control Temperature and Save on Energy Costs

Moisture in the air impacts your HVAC’s ability to maintain a constant and comfortable temperature. When moisture and humidity are high, your system has to work overtime to remove the moisture and control the temperature within your home. Both your heating and your cooling systems have to work harder when humidity and moisture are higher than they should be. So installing a vapor barrier not only saves you energy costs, it will help to extend the lifespan of your HVAC units!

Limit Environmental Hazards

When water is allowed to pool, or moisture to build, it can increase the risk of mold, mildew, and other environmental hazards. By reducing moisture in your crawl space, which is already dark and damp, you can reduce the risk of mold spores and mildew growth. A vapor barrier can also reduce the chance of wood rot, rust, and drywall damage that can lead to structural problems. And since a vapor barrier will reduce the formation of black mold, it is healthier for your family!

Reduce Electrical and Wiring Hazards

If your crawl space houses electrical wires, there is a chance that moisture accumulation can lead to rusted wires, electrical shorting, and even cause a fire. So eliminating the risk of moisture to exposed electrical wires is not only a must for fire prevention, but also to reduce the risk of electrocution.

Preserve Sewer and Water Pipes

Located in your crawl space are sewer and water lines that run below your home. When water and moisture are allowed to sit on pipes, it leads to rust and decay, especially in older homes. When you install a vapor barrier, it helps to keep your pipes in good working order for a longer lifespan. That will help to save you a considerable amount of money over the long-term.

Save the Structural Integrity of Your Home

When moisture is allowed to go unchecked, wood rot can be a serious issue. That can lead to a significant problem with the structural integrity of your home. And any structural damage that results is not only dangerous to the safety of your family, but also, the cost of repairing it is astronomical. Vapor barriers help to keep the foundation of your home strong and undamaged, which is highly critical to protecting your investment.

What are Signs That Your Crawlspace is Retaining Moisture?

It is nearly impossible to stop moisture in your crawl space without a vapor barrier. But it is important to look for these warning signs that the problem is worse than you thought.

  • Pooling water in your crawlspace
  • Peeling of the exterior paint of your home
  • Insect infestations or other signs of pests
  • Rust on your HVAC system
  • Mildew or mold on the walls or flooring
  • Odors sporadically around your home
  • Higher than acceptable levels of radon
  • Rotten wood on the floor or ceiling of your crawlspace
  • Rusted pipes
  • Exaggerated respiratory illness, asthma and allergy irritation, frequent headaches or other health concerns related to mildew and mold

How a Vapor Barrier Increases the Value of Your Home

The small investment made to install a vapor barrier will help to increase the overall value of your home. Not only will it help to keep the air quality more healthy, it will reduce any structural or environmental degradation stemming from moisture and humidity issues. But the vapor barrier is only as valuable as the professionalism of the installer. That is why it is critical that you hire experts like Carney & Son to ensure that it is done correctly.

Best Practices to Keep Your Crawl Space Moisture-Free

When possible, make sure to take all precautions to keep your crawl space moisture-free. If you notice any standing or pooling water, remove it immediately. And if it is has penetrated anything like drywall or insulation, remove and replace that as well. Also, perform routine checks to make sure that your crawl space is dry and that no water has made its way in. And since prevention is best, install a vapor barrier to reduce the risk of any damage to either your home or the health of your family.

Maintaining a moisture-free crawl space is critical for your greatest investment and the health of your family. The small investment that you make to do it correctly, by hiring Carney & Son, will reduce energy costs, protect the integrity of your home, and keep things mildew and mold-free. Contact us today to discuss how you can reap all the benefits that a vapor barrier can provide!

Prepare Your HVAC System for Hurricane Season

As anyone who lives in Charleston knows, hurricane season can really hit home. Not only are they extremely dangerous, they are highly destructive to your home and your HVAC system. Although you already have an action plan in place that includes flashlights, storm-proofing and having enough non-perishable foods on hand, do you have any idea how to protect your HVAC if a hurricane hits? To keep you and your family safe, prepare your HVAC Charleston, SC system for the stormy season ahead.

The Calm Before the Storm

When it comes to protecting your assets against a hurricane, prevention is key, even for your HVAC system. Since you have a lot invested in your HVAC units, take the right precautions to protect them when a storm hits. Not having things under wraps can end up costing you hundreds to thousands of dollars if you need to replace or repair your unit. Before the storm:

Make sure that you schedule your regular maintenance so you know that things are working in top shape. A technician can help to uncover any vulnerabilities that need to be addressed. And they can also guide you on how best to keep things covered and protected.

If it is hot outside before the storm is set to hit, make sure to cool your house down as much as possible. You will not be able to use your air conditioning for a while if your power goes out. And if you have a window AC unit, remove and unplug it before you seal the exterior of your home to shield it against a hurricane storm.

Secure your AC unit or any other exposed HVAC components to their base using a hurricane-approved strap or a cage. And tarp your unit so that it won’t get hit by any falling debris or objects that can do some major damage.

Remove any existing items around the HVAC unit so that they won’t damage the AC if the winds kick into high gear. Also, check for any branches or limbs that might break off and hit hard.

Consider purchasing a generator, in case you have to go without electricity.

When the Storm Hits

When the storm is in full swing, make sure to turn off any circuit breakers that service your HVAC system to prevent a power surge.

After Things die Down

Once the storm has passed:

Check outdoor equipment to make sure that there isn’t any damage to the unit like dings or dents. If there is damage, document it immediately, in case you have to make a homeowner’s claim. Also, make sure to remove anything that is impeding the AC unit before you turn it back on. Otherwise, debris can get sucked into the coils and lead to damage.

Put your AC unit back in the window. If you have any flooding around your property, especially around the AC unit, do not restore power to it unless you have a trained technician inspect it. Call a HVAC Charleston, SC specialist at Carney and Son to inspect the area for any hidden dangers.

It is important to be aware of outdoor conditions to protect your AC unit and any other HVAC equipment from outdoor elements, especially when a storm is approaching. Also, during hurricane season, do a clean sweep to inspect and make sure everything is running properly. But when you have been alerted of a storm, take the necessary precautions to keep both your HVAC and your family, safe from danger. And after the storm hits, contact Carney and Son to help with any problems that you might have related to the hurricane.

Benefits of Air Duct Cleaning

The quality of the air in your home is critical to reducing allergens and keeping everyone safe and healthy. Although regular air filter changes will help to reduce small particles from making their way into the ductwork, they are not a fail-safe. When dirt and debris get into your vents and ductwork, they can become trapped. And over time, they can cause things like mold spore formation and other unhealthy consequences. Not just about increased air quality, these are other air duct cleaning in Charleston, SC benefits.

Reduce Energy Costs

The way that heat and cooling is administered to your home is via the ductwork. And if the ductwork becomes clogged with dirt and debris, it can compromise the airflow of your home’s circulation. That forces your furnace to work overtime, and will significantly increase your heating and cooling energy costs. Cleaning your air ducts will help to increase airflow and stop your furnace from working overtime to keep up with the demand for maintaining a constant temperature.

Improves Air Quality

When dirt and debris get into your ductwork and become trapped, they can start to produce mold and mildew. Mold spores can significantly reduce the air quality of your home. And mold can pose a significant health threat to you and your family. So reducing the risk that it is lurking in your ducts by cleaning things up is the best way to keep everyone breathing easy!

Reduce Allergens and Irritants

Allergens that get trapped into your HVAC continues to recirculate throughout the house, which can wreak havoc on allergy sufferers. Getting your ductwork cleaned will help to eliminate small particles that are trapped and increase the overall quality of the air you, and your family, breathe. Also, cleaning and other household chemicals can, likewise, get stuck in your air vents and cause a whole lot of irritation. By cleaning out your ducts professionally, you will help reduce things like asthma and allergy attacks.

Removing Odors and Smells

If you allow dirt, mold, and mildew to accumulate in your ductwork, it can begin to smell bad. Although every home has a unique smell, if yours is based on rotting in your ductwork or things like tobacco odors getting trapped, the only way to freshen things up is to get your ducts professionally cleaned.

If it has been a while since you had your air ducts cleaned, now is a perfect time. Before you turn your thermostat from cool to heat, make sure that your vents and ducts are free and clean. Duct cleaning helps to remove chemicals and allergens, improve the air quality of your home, and increases your energy efficiency to reduce costs.

Contact Carney & Son today to schedule your next ductwork cleaning!

6 of the Most Common Heating Problems in Homes

Although there are all sorts of things that can go wrong with your heating unit, there are six common heating problems that homeowners see most often. Most heating repair problems can be avoided with a little troubleshooting and TLC. But if you aren’t sure what the issue is, it is best to call in an expert to solve your heating concerns. These are the six most common heating problems, and when possible how to solve them.

No Scheduled Heating Maintenance

Although many homeowners give very little thought to regular furnace or gas heater maintenance, they absolutely should! When you don’t regularly maintain your heating unit, there is no way to spot signs of trouble before they become highly troublesome and costly. Not having your system maintained can lead to an expensive repair call, or worse, the need to replace your system before it is time.

Problems with the Ignition Control or the Pilot Light

Heating systems typically have two types of ignition systems, either an intermittent pilot or a hot surface ignition. If the furnace ignition is to blame for your heating problem, it can cause intermittent heat or no heating at all. Sometimes it requires just relighting the pilot, and other times it warrants a repair call.

Clogged or Dirty Filters

If you aren’t regularly changing your air filters, it can be diminishing the airflow around your home. That will make your unit work harder and lead to excessive wear and tear. Dirty filters can also cause a malfunction of the limit switch, which is responsible for turning the fan on and off. Changing the air filter monthly is imperative to keep things flowing freely and extending the lifespan of your heating unit.

Lack of Airflow or Circulation

If you have aging belts, ducts, fan motors, or bearings, it might be cutting down on your furnace’s ability to circulate air properly. That will make it nearly impossible for your unit to maintain a consistent heat or to keep up with its necessary load demands.

Leaky Ductwork

Ductwork is the system that carries the heated air from your gas heater or furnace to the rest of the house. If you have a leak in your ductwork, then air can seep into unfinished spaces that don’t need to be heated. Not only will that make it harder to keep things warm, it can decrease air quality and cause a “backdraft”.

Broken or Faulty Thermostat

Whether you have a traditional or a programmable thermostat, if it is not working properly, then it is sending the wrong signal to your furnace. Common reasons that your thermostat might not be working are a missing or low battery, misread temperatures, or misused settings. If your heating is not working correctly, check your thermostat, it might be the culprit.

Many things can cause a furnace or gas heater not to work correctly, and most of them can be avoided. By having regular maintenance on your HVAC system, you can stop a small problem before it becomes both problematic and expensive. But if you are having a hard time diagnosing the source of the problem, contact Carney & Son. We can fix any heating repair problem or handle any heating maintenance issue you have.